Description: For those that have done an auto to manual swap in their Civic or Integra, you know how much noise and air comes through the uncovered automatic shifter holes. This cover is designed to cover both of the large automatic holes using the 6 automatic shifter bolt holes. I also built the factory center console mount locations into this piece so you don't have to go find that either. You will need to source the lower and upper boots as they are no longer available from Honda (junkyards are a great option).
These discounted version are basically the scratch and dent versions, printers that still usable, but not perfect, might have a corner that has a slight warp or an edge that's off. These are only in stock when I have a print mishap.
Color/Material: Black ABS
Tools Needed: 6mm Hex Wrench 10mm wrench or socket Drill & 6mm bit for EK/DC chassis
Install / Modifications: No Modifications for EF/EG/DA/Del Sol. EK and DC require the 2 front holes to be drilled.
What's included in the box: Auto to Manual Cover 6x M6x25mm Hex Bolts 6x M6 washers 6x M6 nylon locking nuts
